Products
MIM & PM parts across six material platforms, plus high density tungsten alloy products.
High Density Alloy
High density alloy is based on W (W's mass fraction is 80%–97%), and added with Ni, Fe, Mn, Co, Cu, Mo, Cr and other elements.
- Features
- High density, high strength, high temperature resistance, corrosion resistance
High Density Alloy
39 products
Tungsten Alloy Counterweight
High density tungsten alloy counterweights for vibrating motors, mobile phones, electric toothbrushes, massagers, golf, fishing gear and vehicles.
Tungsten Alloy Ball
Precision tungsten alloy balls for counterweights, hunting shots and industrial applications.
Tungsten Alloy Ring
Tungsten alloy rings for jewelry, industrial counterweights and precision applications.
Tungsten Alloy Grain
Tungsten alloy grains for sports goods counterweights, aircraft and tank counterweights.
Tungsten Alloy Aerospace Turbine Counterweight
Heat-resistant W-Ni-Fe counterweight for APUs and jet turbine control valves — atmosphere-controlled liquid-phase sintering, ≥ 400 MPa yield at 400°C and hardness retention up to 450°C for high-RPM rotational stability.
Deep Sea Fishing Sinkers
High-density PM/MIM fishing sinkers with faster sinking rates, enhanced stability and superior durability compared to traditional lead or cast weights — eco-friendly, lead-free and corrosion-resistant in saltwater.
Tungsten Alloy Aircraft Aileron Counterweight
W-Ni-Fe heavy alloy counterweight installed within wing ailerons for roll-control damping — sintered density ≥ 17.5 g/cm³, yield strength ≥ 580 MPa and Charpy impact energy ≥ 18 J/cm² to withstand aerodynamic shear.
Golf Club Head
PM-manufactured golf club heads with superior structural integrity, optimized mass distribution and consistent ball-striking performance — uniform density and precise CG/MOI control that casting and forging cannot match.
Tungsten Alloy Aircraft Flap Counterweight
AMS-T-21014 Class 1 trailing-edge flap counterweight for aerodynamic flutter suppression — 17.0–18.2 g/cm³, 26–32 HRC, ≥ 12% elongation, custom plating with >500 h salt-spray resistance.
Golf Club Weight
Precision-engineered MIM/PM golf club weights that optimize swing balance, feel and trajectory — high-density alloys with ±0.02 mm tolerances for consistent performance across clubs and models.
Tungsten Alloy Aircraft Radar Equipment Counterweight
Non-magnetic W-Ni-Cu counterweight for airborne radar and radome assemblies — 17.0–17.8 g/cm³ of concentrated mass that shifts resonant frequency away from airframe vibration with zero magnetic interference.
High Density Tungsten Weights
Precision-engineered tungsten weights delivering maximum mass in minimal volume — uniform density, tight tolerances and superior mechanical stability via in-house tungsten powders and PM/MIM processing.
Tungsten Alloy Aircraft Rotor Balance Counterweight
AMS-T-21014 W-Ni-Fe counterweight for main lift rotors and propulsion assemblies — 17.5–18.2 g/cm³, ≥ 580 MPa yield strength and full aerospace batch traceability for flutter-free dynamic balance.
Knurled Tungsten Darts
Precision-engineered tungsten dart barrels for professional and competitive players — high density in slim profiles with precise center-of-gravity control, knurled or ringed grips and durable PVD/Ni/Cr finishes.
Tungsten Alloy Aircraft Tailplane Counterweight
Class 1 heavy W-alloy empennage counterweight for horizontal and vertical tailplanes — 17.0–18.0 g/cm³, ≥ 750 MPa tensile strength and cadmium-free plating tested to 500 h salt spray against galvanic corrosion.
Tungsten Alloy Aircraft Wing Spar Counterweight
Class 2 / Class 3 heavy alloy counterweight integrated into spar extensions and wingtips — 17.5–18.2 g/cm³, ≥ 600 MPa yield strength, cyclic fatigue tested to AMS-T-21014 for aeroelastic flutter suppression.
Tungsten Alloy Aviation Navigation System Counterweight
Completely non-magnetic W-Ni-Cu counterweight for INS and flight management systems — magnetic permeability ≤ 1.01, ±0.01 mm machining tolerance and 17.0–17.5 g/cm³ damping mass for vibration-sensitive avionics.
Tungsten Alloy Balance Counterweight
W-Ni-Fe (Class 1-4) balance counterweights for static and dynamic structural balancing in modern aviation — meticulous center-of-gravity management within highly confined structural envelopes.
Tungsten Alloy Missile Control Surface Counterweight
High-strength W-Ni-Fe counterweight inserted into missile fin and canard leading edges — 17.5–18.0 g/cm³, ≥ 850 MPa tensile strength and excellent thermal shock resistance to eliminate high-Mach flutter.
Tungsten Alloy Counterweights
Tungsten alloy counterweights with density up to 18.5 g/cm³, dimensional stability and mechanical strength for precision applications across industrial, automotive, aerospace and electronic systems.
Tungsten Alloy Missile Guidance System Counterweight
Class 3 heavy alloy inertial stabilization block for guidance electronics and seeker heads — 18.0–18.5 g/cm³, ≥ 800 MPa tensile strength, ISO G1.0 dynamic balancing, non-magnetic W-Ni-Cu variant available.
Tungsten Balance Weights
Tungsten balance weights providing precise equilibrium for rotating, oscillating and vibration-sensitive systems — 16–18.5 g/cm³ density in a compact footprint with CNC finishing and Ni/Ag/Au plating options.
Tungsten Alloy Propeller Control System Counterweight
High-density inertial counterweight for variable-pitch propeller assemblies — MIM / die pressing + vacuum sintering, 17.0–18.0 g/cm³, ≥ 750 MPa tensile strength, up to 30% cost savings vs CNC at 100k+ pcs/month.
Tungsten Bead Fishing Lures
High-density tungsten beads for fly tying, micro-jigs and finesse lures — rapid sink rates, precise spherical geometry and balanced underwater behavior in slotted, countersunk and round options.
Tungsten Alloy Satellite Gyroscope Counterweight
Non-magnetic W-Ni-Cu inertial core for satellite attitude and stabilization control units — permeability < 1.01, ISO G0.4 dynamic balancing, ±0.005 mm machining tolerance, 100% X-ray / ultrasonic NDT verified.
Tungsten Counterweight
Heavy tungsten alloy counterweights engineered for rotorcraft blade balancing — 17.5–18.2 g/cm³ density embedded in leading edges to modify inertia, suppress vibration and stabilize flight dynamics.
Tungsten Alloy Satellite Stabilization Counterweight
High-purity W-Ni-Fe stabilization mass for nadir-pointing booms and gravity-gradient configurations — 17.8–18.4 g/cm³, CVCM < 0.1% / TML < 1%, linear CTE 4.5–5.0 for decade-long orbital stability.
Tungsten Counterweight Block
Vacuum-sintered tungsten counterweight blocks for spacecraft static and dynamic equilibrium — zero outgassing, 17.0–18.5 g/cm³ density and CTE matched to aerospace structural metals.
Tungsten Alloy Spacecraft Attitude Control Counterweight
Space-grade W-Ni-Fe counterweight for orbital attitude control systems — 17.8–18.5 g/cm³, zero outgassing (CVCM < 0.1%), magnetic permeability < 1.05, gold / nickel plating available.
Tungsten Exercise Weights
Compact high-density tungsten exercise weights for fitness training, wearable resistance systems and athletic conditioning — 2–3× the density of steel enables greater resistance in smaller, ergonomic forms.
Tungsten Alloy Spacecraft Gyro Stabilizer Counterweight
High-purity W-Ni-Fe / W-Ni-Cu counterweight for control moment gyroscopes (CMGs) and reaction wheels — 18.0–18.5 g/cm³, ≤ 0.002 mm concentricity, ISO G0.4 balance, outgassing approved for deep space.
Tungsten Golf Club Heads
PM/MIM tungsten golf club heads with exceptional density distribution and vibration damping — precise CG and MOI tuning for enhanced forgiveness, trajectory control and shot consistency in premium clubs.
Tungsten Alloy Spacecraft Thruster Counterweight
Refractory tungsten alloy counterweight for propulsion bay mass balancing — 17.5–18.4 g/cm³, thermal resistance up to 500°C, CVCM < 0.1%, custom threaded / flanged mounting for satellite bus architectures.
Tungsten Golf Club Weights
Tungsten golf club weights leveraging 16–18.5 g/cm³ density for precise mass concentration in small volumes — swing weight, CG and MOI tuning with CNC-machinable precision for putters, drivers and irons.
Tungsten Heavy Counterweight
Extreme-precision tungsten heavy counterweights for inertial navigation and guidance — W-Ni-Cu / W-Ni-Fe rotors and gimbal weights machined to ±0.005 mm with ISO G0.4 dynamic balance grade.
Tungsten Nickel Iron Alloy Balls
W-Ni-Fe alloy balls with ≈17–18 g/cm³ density, precision roundness and mirror-polished finishes — compact mass and energy storage for sporting goods, aerospace and precision balancing systems.
Tungsten Split Shot Sinkers
Precision tungsten split shot sinkers for anglers seeking high sensitivity, rapid sink rates and natural lure action — compact, non-toxic and reusable with strong clamping force and line-friendly smooth edges.
Tungsten Vibrator Weights
Precision tungsten weights for micro vibration motors in smartphones, wearables and haptic devices — maximum mass in minimal volume for stronger vibration output and high-fidelity haptic feedback.
Tungsten Watch Weights
Precision tungsten micro-weights for high-end mechanical and smartwatches — ultra-high density in micro form factors for rotor balance, smooth winding performance and slimmer watch designs.
Request a Quote — NEWLIFE MIM
Send your 2D/3D drawings for MIM feasibility evaluation and quotation. Response within one business day.