Tungsten Alloy Gyroscope Rotors
High-density tungsten gyroscope rotors for advanced navigation, aerospace and defense systems — maximum rotational inertia in compact dimensions with exceptional balance and thermal reliability.
- Materials
- W-Ni-Fe tungsten alloy (self-developed powders)
- Features
- Density up to 18.5 g/cm³, precision balance for reduced gyroscopic drift, high strength under centrifugal and impact forces, low thermal expansion, corrosion-resistant surfaces
- Application
- Aerospace navigation gyroscopes in satellites and aircraft, precision robotics and stabilization systems, defense-grade IMUs and guidance modules, industrial rotational sensing, marine navigation.
Specifications
| Parameter | Value |
|---|---|
| Density | Up to 18.5 g/cm³ |
| Alloy System | W-Ni-Fe |
Frequently Asked Questions
What materials and process are used for Tungsten Alloy Gyroscope Rotors?
Tungsten Alloy Gyroscope Rotors is made from W-Ni-Fe tungsten alloy (self-developed powders) and is formed by MIM/PM (metal injection molding / powder metallurgy) near-net-shape and sintered to a relative density of ≥ 98%, which keeps mechanical properties close to wrought material.
What are the key specifications of Tungsten Alloy Gyroscope Rotors?
Typical specifications: Density: Up to 18.5 g/cm³; Alloy System: W-Ni-Fe. The full parameter list is in the specifications table on this page; custom requirements can be discussed against your drawing.
What is the MOQ and lead time for Tungsten Alloy Gyroscope Rotors?
MOQ is 1000 pcs. Mold lead time is about 20 days (mold fee typically RMB 20–40k depending on part geometry), and production lead time is about 7 days once the mold is validated; secondary processing adds 3–5 days.
Related Applications
Related Products
Iron Base Alloy MIM Parts
Materials: Fe2Ni, Fe4Ni, Fe8Ni, FeC, FeCuC
High strength, high hardness
View Details
Automotive Powder Metallurgy Parts
Materials: Proprietary PM/MIM iron-based alloy powders
High strength-to-weight ratio, near-net-shape forming, tight tolerances, excellent wear and friction resistance, complex geometries with internal cavities, heat treatment and coatings supported
View Details
Copper Nickel Tungsten Components
Materials: Cu-Ni-W alloy (self-developed powders)
High strength with excellent thermal/electrical conductivity, superior corrosion and oxidation resistance, thin-wall complex geometries, homogeneous microstructure, cost-effective high-volume production
View Details
Copper Tungsten EDM Electrodes
Materials: Tungsten copper (W-Cu), W70Cu30 to W90Cu10
High arc resistance, rapid thermal dissipation, uniform erosion rate, machinable for fine-tolerance complex shapes, minimal thermal distortion, PM/MIM near-net-shape production
View Details